Product Catalog

    312 products

    How to Choose the Right Contactor

    This guide is here to help you narrow your options quickly and avoid common mistakes. You don’t need to be an expert — just match the contactor to what you’re actually switching.

    Start with what you’re controlling

    Different loads stress contactors differently. This determines which rating matters:

    • Motors: Use the AC-3 rating (most applications).
    • Heaters / resistive loads: Use the AC-1 rating.
    • Jogging / inching / frequent starts: Use the AC-4 rating.
    Choose current using the correct rating

    The largest current number is not always the right one. If you’re switching a motor, ignore AC-1 and focus on AC-3 amps.

    Match the coil voltage exactly

    The coil voltage must match your control circuit (for example, 24 VDC or 120 VAC). A mismatch here means the contactor simply won’t operate.

    Confirm the system voltage rating

    Make sure the contactor is rated for your system voltage under IEC or UL/CSA, depending on your standards requirements.

    Refine only if needed

    Once the basics are right, use these to narrow things down:

    • Number of poles (typically 3-pole for three-phase)
    • Auxiliary contacts (NO / NC for control logic)
    • Physical size if panel space is tight
    Common pitfalls
    • Using AC-1 current for motor applications
    • Overlooking coil voltage compatibility
    • Using AC-3 contactors for jogging/inching duty